日本語マニュアルは以下のアドレスに移動しました。
japanese manual change URL below

VR77B(R-SIM12B)マニュアル

 

English manuals

How to set up


tail of adupter is behind of steel tray( Do not bend your sim unlocking base.
It will be broken if you put wrong way)

 


[1]PLUG & PLAY MODE


The default version,au /sb/sprint/docomo/att/vrzen,etc,inserting it and 4G signal availble automatically, namely 4G auto mode ( Fit for 5s to iphone x ), similar to unlocked Non-contract iphone.(under ios10.4)

 

[2]ICCID MODE

 

(video)https://www.youtube.com/watch?v=n0m5oVFlbak

*****************************

latest iCCID code:check

if the code blocked by apple

please wait for few weeks to make new iccid code

you can check new number here

*****************************

1. Look at the manual for SIM you purchased and install appropriate APN.

2. Avoid activation.

When you set this product together with SIM card and insert into mobile phone, the screen signs “You need to activate. “

Though you select “I understood.” and it signs “Updates have completed. “, but then if you push the Home once, it signs “emergency call” command on the bottom of the screen. After tapping it, it transfers to the screen to dial the numbers, and tap “Call” button after dialing “*5005*7672*00#” or “*5005*7672*99#”.

3. choose “Edit iccid.” and enter NEW ICCID NUMBER[check latest number here!:’latest iccid code‘ ],and click send.

4.restart iphone

 

 

Edit ICCID,Input 20 DIGITAL ICCID CODE(NEW CODE)

 

 

at last input newest iccid code and restart your phone

please wait 5~10 minute for get telewave

(if appear sim no service:Plug your sim needle into the hole and disconnect your sim a little (about 5mm) and put again and wait few minute again)

 

HOW TO UNLOCK YOUR IPHONE, IF YOUR PHONE SHOWS “NO SERVICE” EVEN THOUGH YOU ENTERED THE CORRECT ICCID ?<br>

<br>

1)Put the chip and sim card on a different UNLOKCED iphone <br>
2)Go to ‘Settings -> Phone-> SIM Application’ -> ‘Edit ICCID’ Enter the latest 20 digit ICCID code<br>
3)Send/ Accept it<br>
4)Just Press “*3g/4g Supreme Sharp Mode” – All Done <br>
5)Remove the chip and replace back to the LOCKED phone with sim card (the phone which shows No service) <br>
6)Activate with wifi<br>
7)Phone will be unlocked<br>

 

[3]ALL MANUAL MODE(not perfect unlock)

 

apple make new program to disturb VRSIM 2017/12/06 14:00

after this time you need manual settings to activate your iphone.
or if iccid code sill be closed by apple, Temporarily you need set by all manual mode until you get new code 

1. Look at the manual for SIM you purchased and install appropriate APN.

2. Avoid activation.

When you set this product together with SIM card and insert into mobile phone, the screen signs “You need to activate. “

Though you select “I understood.” and it signs “Updates have completed. “, but then if you push the Home once, it signs “emergency call” command on the bottom of the screen. After tapping it, it transfers to the screen to dial the numbers, and tap “Call” button after dialing

*5005*7672*00# or *5005*7672*99#to make a call then it will show up a menu

3. Carrier Select— 1. Choose your iPhone carrier first,(brand of machine)


*Be careful. It is NOT the mobile carrier of SIM card! [exemple: if you use  t-mobile iphone you choose t-mobile]

Then choose mode which one below

try ①.6S/6SP/SE UNLOCK mode  first,

if no work,next try ②.TMSI mode secound

almost any sim can unlock by these mode  but

*if not work please try all mode below
for CDMA sim :4G CDMA SIM Supreme mode
and for GSM sim :GSM(2/3/4G Card) mode

 

after you choose mode you find [sim no service]

then you restart your iphone or

Plug your sim needle into the hole and disconnect your sim a little (about 5mm) and put again

wait few minute (4~5 minute)

—————-4TYPE OF MODE————————————————————

1.6S/6SP/SE UNLOCK MODE
At first you should choose 6s,6s9,se perfect unlock mode. Choosing corresponding operator and unlocking mode, take out the card and insert it in to wait signal. CMCC and Unicom unlocked perfectly.

PS:If no signal after waiting for about 1 min, after all setting done, taking out and insert card once again, then signal available soon.

2.TMSI unlock AUTOMODE1 mode, as TMSI mode not perfect unlocking, sometime signal will be off or no service, this mode can gain signal automatically.

Above operation pls refer to video instruction.

3.TMSI unlock AUTOMODE1 mode, is quicker for signal receiving than AUTOMODE1, and no need dialing 112 for quick signal receiving. ( This mode recommeded )

4.Sim card program support sim card reader update

SIM Card menu

 

一、It is double mode unlock, fit for most mobile in 2g GSM net

二、TMSI Mode applied in 4G net,  with 4 unlock modes.

(video)

https://www.youtube.com/watch?v=fPIjE0tg6w8

https://www.youtube.com/watch?v=JzEVCtFItPA

https://www.youtube.com/watch?v=F0R-URnMu9Q

Enter in menu, there’re 4 modes for choice.

2.1Manual MODE1(CMCC, Unicom UNLOCK)

Instruction: Enter into Activate mode, wait for 4g net appeared, then dial 112. Take out sim card and insert in, and wait for signal appeared.

Choosing this unlock mode, mobile will enter into activate mode automatically if signal off, and there will be sound notice to unlock again and regain signal, in case of missing call. ( Operation Instructions please refer to video. )

2.2 Manual MODE2(CMCC, Unicom UNLOCK)

1st step: Insert Sim card and mobile card into mobile, choose your mobile operator, choose Manual Mode2, then click Accept button, complete card setting, turned your mobile off and then turn on.

Step 2: enter into Sim card application program, choose,mobile will enter into “ Need activating mode” automatically, take care of mobile signal and 4G signal, wait for seconds and dial 112, in seconds, take off card and insert in quickly, then wait for signal and complete unlocking. ( If it doesnot work at first time, please try a few more times.

PS:This method fits for unlocking CMCC card.

2.TMSI unlock AUTOMODE1 mode, as TMSI mode not perfect unlocking, sometime signal will be off or no service, this mode can gain signal automatically.

Above operation pls refer to video instruction.

2.TMSI unlock AUTOMODE1 mode, is quicker for signal receiving than AUTOMODE1, and no need dialing 112 for quick signal receiving. ( This mode recommeded )

2.4 CMCC can unlock by following methods:

Method 1

2.41Instruction step: choose->Manual mode2, then take off card, and insert SIM card in mobile phone alone, 4G signal appears, click “ mobile data activate phone”, SIM card shows invalid, then turn off mobile phone to take off SIM card. Insert SIM Card together with mobile card into mobile phone, waiting for mobile gaining signal.

Method 2

2.4.2 1st step: Insert Sim card and mobile card into phone, choose“”mode,  click “Accept, complete card setting.

Step 2: take out SIM card, insert Unicom and CMCC 4g card into mobile phone, mobile recognized SIM card, it will enter into “ Activation required” automatically, mobile will appears solid 4G signal, click next step and it shows SIM card invalid, then turn off mobile. ( mobile screen turns black, and wait 10 seconds for fully off ).

Step 3: Insert Mobile card and SIM card into mobile, turn on mobile phone, CMCC signal will appear. Or sometimes 2G signal appears first, wait for a moment, then Unicom and CMCC 4g signal gained.

三、    4G CDMA sime supreme sharp; CDMA 4g  ios 9 to ios11 unlock method

Step 1: Insert SIM card and telecom card into mobile phne, choose CDMA4G if you use telcom card, then choose relevant operator ( only sprint, Japan AU and softbank 3 version support telecom), then click “ Accept” , complete card setting.

Step 2: take out card, insert telecom card into mobile phone alone, mobile will recognize SIM card and enter into “ Activation required” mode automatically, then mobile will appear solid full signal and 3G, if you use 4G card, mobile will appear solid 4G signal, then click next step to activate. Mobile will show invalid SIM card, then turn off your mobile phone. ( mobile screen turns black, and wait 10 seconds for fully off ).

Step 3: Insert mobile card and SIM card together into mobile phone, turn on mobile phone, telecom signal will appear, complete unlock.

In SIM card application function