*5005*7672*5858#


*5005*7672*88#

 

 

【1】ICCID MODE

(video)http://www.ideallte.com/list-42-1.html
http://v.youku.com/v_show/id_XMzI0MTczMTA1Mg==.html?spm=a2hzp.8244740.0.0

*************************************

latest iCCID code:check

if apple block the code,please wait for few days to make new iccid code

you can check new code here http://www.ideallte.com/list-42-1.html

************************************


tail of adupter is behind of steel tray( Do not bend your sim unlocking base.
It will be broken if you put wrong way)

1. Look at the manual for SIM you purchased and install appropriate APN.

2. Avoid activation.

When you set this product together with SIM card and insert into mobile phone, the screen signs “You need to activate. “

Though you select “I understood.” and it signs “Updates have completed. “, but then if you push the Home once, it signs “emergency call” command on the bottom of the screen. After tapping it, it transfers to the screen to dial the numbers, and tap “Call” button after dialing “*5005*7672*5858#”.(if4G-Ⅲ:*5005*7672*88#)

3.  enter NEW ICCID NUMBER:[check here!’latest iccid code‘ ],click send.:
if4G-Ⅲ: that is all.Reboot your phone and activate)

4G-Ⅱ
next find black menu. Select “Activative Mode”

(If there is no model menu after setting the iccid code, please click the emergency call – input: *5005*7672*00# and select any operator after dialing, then select “Activative Mode”.video:http://v.youku.com/v_show/id_XMzI0MTczMTA1Mg==.html?spm=a2hzp.8244740.0.0)

 

4, after you choose “Activative Mode”. Shut down reboot iphone or directly pull follow the steps to unlock again

 

 

3,jump activation and then press the system to activate it to be perfect and stable 4G/LTE!

 

 

 

 

▼ICCID will be colsed by apple in days.If the code closed,you can wait next code
so ICCID CODE will change often

———————————————————————–

[2]ALL MANUAL MODE(not perfect unlock)

If you do not have active ICCID you can use MANUAL mode

1. Look at the manual for SIM you purchased and install appropriate APN.

2. Avoid activation.

When you set this product together with SIM card and insert into mobile phone, the screen signs “You need to activate. “

Though you select “I understood.” and it signs “Updates have completed. “, but then if you push the Home once, it signs “emergency call” command on the bottom of the screen. After tapping it, it transfers to the screen to dial the numbers, and tap “Call” button after dialing

*5005*7672*00# to make a call then it will show up a menu

2. Carrier Select— 1. Choose your iPhone carrier first,
*Be careful. It is NOT the mobile carrier of SIM card! [exemple: if you use  t-mobile iphone you choose t-mobile]

Next choose  6)TMSI mode

after you choose mode you find [sim no service]

then you restart your iphone or

Plug your sim needle to the hole and disconnect your sim a little (about 5mm) and put again

wait few minute (5~6 minute)

 

2) when no signal or no sim show up ,you can go to setting-phone-sim application- imsi get signal to retrive signal or enter *5005*7672*11# to retrive. if still no work,try below

1. Just put mobile sim in iphone, when activate screen show up, forgot wifi network, choose Cellular network to active iphone,

2.when sim card invalid show up,put unlock sim and mobile sim together into iphone then wait for signal